The Persistent Bark Indicator; Testing The Ys600 - Dogtra Europe YS600 Manual De Instrucciones

THE PERSISTENT BARK INDICATOR

The Persistent Bark Indicator activates when the unit is
turned off and when there has been excessive barking.
1. Without excessive barking :
– The LED will glow red for 2 seconds when the unit is
turned off.
2. With excessive barking :
– The LED will blink green for 10 seconds when the unit is
turned off.
– Excessive barking may indicate that the stimulation
intensity level is set too low.
* Before increasing the stimulation intensity level, check
to see that the collar has a proper fit and both contact
points are touching your dog's neck.
26

TESTING THE YS600

1. Turn the dial to "T". The LED indicator will blink once
every 4 seconds.
2. Use the cap end of a ballpoint pen and scratch between
the contact points. The unit is working properly when it
vibrates twice.
* The sensor is set to high sensitivity on test mode to
activate more easily. The test mode will only produce a
non-stimulating vibration.
27