Active AGi2100 Manual Del Usuario página 65

7. OPERATION:
Application range
When using the generator, make sure the total load is within rated output of a
generator. Otherwise, damage to the generator may occur.
AC
Power
factor
AGi2100 ~ 1600W
TIP:
• "~"means "below".
• Application wattage indicates when each device is used by itself.
• The simultaneous usage of AC and DC power is possible but total wattage should
not exceed the rated output.
EG:
Generator rated output
Frequency
AC
DC
The overload indicator light comes on when total wattage exceeds the application
range.
NOTICE
• Do not overload. The total load of all electrical appliances must not exceed the
supply range of the generator. Overloading will damage the generator.
• When supplying precision equipment, electronic controllers, PCs,
computers, microcomputer based equipment or battery chargers, keep the generator
a sufficient distance away to prevent electrical interference from the engine. Also
ensure that electrical noise from the engine does not interfere with any other
electrical devices located near the generator.
• If the generator is to supply medical equipment, advice should first be obtained from
the manufacturer, a medical professional or hospital.
• Some electrical appliances or general-purpose electric motors have high
starting currents, and cannot therefore be used, even if they lie within the supply
ranges given in the above table. Consult the equipment manufacturer for further
advice.
1 0.8-0.95
~ 1280W
1600VA
Power
factor
1.0 ~ 1600W
0.8
~ 1280W
100W(12V/8.3A)
- -
0.4-0.75
Efficiency 0.85
~ 544W
DC
Rated voltage 12V
Rated current 8.3A
65