auna Splash Manual De Instrucciones página 38

EN
38
To recall a preset when listening to DAB radio or FM radio
1. To tune to Presets 1 to 2, press the corresponding numbered button on
the front panel.
2. To access presets 3 to 20 on the front panel press the 3+ button, turn the
Select dial right or left to scroll through the list of presets, then push and
release the Select dial to tune to the selected preset.
DAB Display modes
Press the INFO button, the display will switch through the following display
modes. The information of each display mode is displayed on the lower
segment of the display.
Signal strength
The display will show a slide bar to indicate the signal strength, the stronger
the signal, the longer the bar will be from left to right.
Programme type
This describes the "style" or "genre" of the programme that is being
broadcast.
Ensemble
This displays the name of the multiplex that contains the station you are
listening to. A multiplex is a collection of radio stations that are bundled
and transmitted on one frequency. There are national and local multiplexes.
Local ones contain stations that are specific to that area.
Note: DAB – unlike normal radio, groups together several radio stations and
transmits them on one frequency.
Frequency
This displays the frequency of the present station, such as "11C 220.352
MHz".
Signal Error
This displays a number showing the error rate. If the number is 0, it means
the signal received is error free and the signal strength is strong. If the error
rate is high, it is recommended to re-orient the aerial or re-position the unit.
Audio Bit Rate
The display will show the digital audio bit rate being received.