Vito Agro VIM7 Manual De Instrucciones página 43

1. Remove cover;
2. Adjust the handlebar height using the column and
handlebar locking holes;
3. Adjust the handlebar holes to the handlebar column
hole;
4. Insert the handlebar fixing pin on the holes;
5. Attach the beta key in the fixing pin;
6. Place the cables fixing clamps;
7. Put cover back on.
1. Engage the transmission cable on the handlebar knob.
Place the beta key;
2. Engage the transmission cable in the transmission lever.
Place the beta key.
1. Place the fenders' back holder on the work accessories
fixed holder. Tighten the fixing screws with the
tightening nuts and their washers;
2. Remove the fixing screws from the support;
3. Place the fenders side holders with the flap pointing
forward and tighten the fixing screws;
4. Adjust the fenders according to the holders' holes. Place
the screws, rubbers, washers and tightening nuts;
5. The fender with the transmission oil sticker must be
placed on the gearbox transmission oil crankcase side.
Assembly
1. Insert the 2-blade set shaft into the set shaft with 2 sets
of 4 blades;
2. Place the spring bolt.
All blades must be oriented in the same direction,
check the indications attached to the shafts with the
corresponding side of each blades set (R, L).
Placement on the traction shaft
3. Engage the blades' shaft in the traction shaft, according
to the indication given (); the blades must have the
cutting edges pointing forward;
4. Place the pin in the blade shaft's inner hole and in the
traction shaft. Place the beta key.
1. Remove the ring bolt from the fixed bracket attached to
the gearbox;
2. Attach the adjustable plough on the fixed bracket;
3. Insert the ring bolt and the beta key;
4. Adjust the horizontal fixing angle on the adjusting
screws;
5. Place the adjustable plough's depth regulator into the
holder;
6. Place the fixing pin into one of the depth regulator's
holes according to the desired height. Insert the beta
key;
7. Adjust the trench width using the adjusting bolts placed
in the adjustable plough.