Cameo P2 T Manual De Usuario página 20

INSTALL FIXED BEAM ANGLE LENS TUBE
PLEASE NOTE:
1. Do not operate the spotlight during the installation or removal of a lens tube.
2. Be careful not to damage or contaminate the lens when installing or removing a lens tube.
Ensure that no foreign bodies enter the spotlight housing.
3. Do not operate the spotlight without the lens tube.
To mount a fixed beam angle lens tube, slide the lens tube with the spring-loaded filter frame
hinge upwards into the tube with the diaphragm slider unit (A). Now turn the two supplied knurled
screws (B) into the corresponding threads in the lens tube and tighten them. To focus the light
projection, loosen the knurled screws slightly and move the lens tube in its guide as desired.
Tighten the knurled screws again after focusing.
REMOVAL OF TUBE WITH DIAPHRAGM SLIDER UNIT
PLEASE NOTE:
1. Do not operate the spotlight during the installation or removal of a tube.
2. Be careful not to damage or contaminate the lens behind when disassembling or assembling
the tube. Ensure that no foreign bodies enter the spotlight housing.
3. Do not operate the spotlight without the tube.
20
B
A
B