Cameo P2 T Manual De Usuario página 27

DMX modes
DMX functions
RDM functions
Stand-Alone
System Settings
User Interface
Display / Indicators
IP-Rating
Ambient Temparature
Rating
Humidity Rating
Cooling System
Noise Level
Operation Voltage
Max. Current
Max. Output Current
Max. power
consumption
Standby power
Fuse
Power Connection
Power-Link
Protection Class
Housing
Minimum distance to
illuminated surface
1CH Dim; 2CH 16bit; 2CH Strobe;
3CH Device; 4CH Device; 5CH Full
Dimmer; Dimmer fine; Strobe;
Device Settings (simple); Dimmer
Curve; Device Settings (full)
Cameo RDM Standard
Encoder Mode Dim Strobe; Slave
DMX Address; DMX-Mode;
Stand-Alone; Slave; Wireless
Settings; Display Off Timer;
DMX Fail; Dimmer Curve; Dimmer
Response; LED Frequency; Fan;
Factory Reset;
1 x Push and turn encoder
OLED display
IP 20 indoor use
-10° – 45° C
<80% non condensing
Forced convection with silent fan;
Fan Off operation
32.4 dB @ Auto Fan Mode
100 V AC – 240 V AC /
50 Hz – 60 Hz
1.08 A @ 230 V; 1,95 A @ 110 V
12 A
219 W @ 230 V; 222 W @ 110 V
42 W
T 6.3 AL 250 V
True 1 compatible In/Out
8 units @230 V; 4 units @ 110 V
Protection Class 1
Die Cast Magnesium Alloy, black
powder coated
0.5 m
1CH Dim; 2CH 16bit; 2CH Strobe;
3CH Device; 4CH Device; 5CH Full
Dimmer; Dimmer fine; Strobe;
Device Settings (simple); Dimmer
Curve; Device Settings (full)
Cameo RDM Standard
Encoder Mode Dim Strobe; Slave
DMX Address; DMX-Mode;
Stand-Alone; Slave; Wireless
Settings; Display Off Timer;
DMX Fail; Dimmer Curve; Dimmer
Response; LED Frequency; Fan;
Factory Reset;
1 x Push and turn encoder
OLED display
IP 20 indoor use
-10° – 45° C
<80% non condensing
Forced convection with silent fan;
Fan Off operation
32.4 dB @ Auto Fan Mode
100 V AC – 240 V AC /
50 Hz – 60 Hz
1.08 A @ 230 V; 1,95 A @ 110 V
12 A
219 W @ 230 V; 222 W @ 110 V
42 W
T 6.3 AL 250 V
True 1 compatible In/Out
8 units @230 V; 4 units @ 110 V
Protection Class 1
Die Cast Magnesium Alloy, black
powder coated
0.5 m
27