Cutting From The Inside Of The Workpiece; Maintenance And Cleaning Instructions; Cleaning And Storage; Environmental Policy - VITO PRO-POWER VITIC570 Manual De Instrucciones

Cutting from the inside of the workpiece

To make a plunge cut, proceed as follows:
1. Drill a hole on the exact point you want to start
cutting, wide enough to insert the blade (1);
2. Insert the blade on the hole;
3. Turn the jig saw on and start cutting. Refer to
"starting and stopping the jigsaw";

MAINTENANCE AND CLEANING INSTRUCTIONS

Before performing any checking, maintenance or
cleaning work, unplug the power cord from the jigsaw.
This equipment doesn't need additional lubrication or
maintenance. However, regular cleaning should be
carried out to ensure continuous, trouble-free
operation.
Keep the blades always clean and sharp. Saw blades
regularly checked regarding its condition, tend to jam
less frequently, can be controlled more easily and allow
greater efficiency when using the jigsaw.
Keep the base plate clean to ensure cutting accuracy.

Cleaning and storage

You can get information regarding the disposal of the
used appliances from the legal persons in charge for
recycling in your municipality.
Cleaning
After each use, clean all jigsaw components. Clean the
jigsaw with a clean, moist cloth or blow with low
pressure compressed air. Careful handling protects the
power tool and extends its service life.
The power tool and its ventilation slots must be kept
clean to avoid motor overheating. Clean the ventilation
slots regularly or whenever they become blocked.
Storage
When not in use, store the jigsaw in a dry, clean place,
free of corrosive smoke and out of children's reach.

ENVIRONMENTAL POLICY

The packaging is made up of recyclable materials,
which you can dispose on local recycling points.
Never dispose of power tools with your
household waste!
According to the European Directive 2012/19 /EC on
electrical and electronic equipment waste and its
transposition into national law, power tools must be
collected separately and delivered to the collection sites
provided for this purpose.

CUSTOMER SERVICE

Tel.: +351 256 248 826
E-mail: international@centrallobao.pt
Site: www.centrallobao.pt
29