Descargar Imprimir esta página

Klein Tools RT390 Manual De Instrucciones página 8

Publicidad

Idiomas disponibles

Idiomas disponibles

ENGLISH
TEST LOAD FUNCTION
Power On the tester and plug into the outlet to be tested, noting the
wiring conditions. The wiring condition
WIRING", the
"ENERGIZED" Indicator 3
Circuit Energized Indicator
If the tester indicates that the outlet is not wired correctly, DO NOT
attempt to initiate an electrical testing event. Consult a quali ed
electrician.
Press the Load Test button
voltage and percentage voltage drop will appear on the screen. NOTE: If
the voltage drop is greater than 5%, the background color will change
to red to indicate a large voltage drop.
NOTE: The Load Test button
detects that the electrical outlet is not wired correctly.
NOTE: During a Load test, a message may display that the tester
needs to cool down
until the unit cools down and the message is no longer displayed.
When the Battery Life Indicator
replaced.
1. Loosen screw from battery cover
2. Replace 3 x AAA batteries (note proper polarity).
3. Replace battery door and fasten securely with screw.
To avoid risk of electric shock, unplug from any voltage source
before removing battery door.
To avoid risk of electric shock, do not operate tester while
battery door is removed.
Be sure tester is turned off and wipe with a clean, dry lint-free
cloth. Do not use abrasive cleaners or solvents.
Remove the batteries when tester is not in use for a prolonged period
of time. Do not expose to high temperatures or humidity. After a period
of storage in extreme conditions exceeding the limits mentioned in
the General Specifications section, allow the tester to return to normal
operating conditions before using.
Do not place equipment and its accessories in the trash. Items must
be properly disposed of in accordance with local regulations. Please
see www.epa.gov/recycle for additional information.
450 Bond Street Lincolnshire, IL 60069
8
customerservice@kleintools.com
OPERATING INSTRUCTIONS
should be displayed.
B
, and the 12A, 15A, and 20A test load
7
will be deactivated if the tester
7
. A successive Load test cannot be initiated
J
BATTERY REPLACEMENT
CLEANING
STORAGE
WARRANTY
www.kleintools.com/warranty
DISPOSAL / RECYCLE
CUSTOMER SERVICE
KLEIN TOOLS, INC.
should indicate "CORRECT
E
should be illuminated, and the
turns red, the batteries must be
C
.
8
1-800-553-4676
www.kleintools.com

Publicidad

loading