Publicidad
Idiomas disponibles
Idiomas disponibles
4. Timer： Press "Timer" button to set the fan between 1-12 hours, the indicator light
will show the selected time and will operate until the preset time passes.
Continuously press the button to your desired running time.
To cancel the timer, simply press the button until the indicator shows "00".
5. Swing: Press "Swing" button to change the wind direction. The swing icon will
appear on the screen when the function is activated. Press the button again to
stop the oscillation. The vertical direction of air flow can be adjusted manually by
directing the outlet louvers up and down.
6. Cool：Press this key to active the air cooler function. Water pump will take the
water from the tank and pour it onto the cooling pad. Cooling pad absorbs the
heat of the water and evaporated air is blown out through the fan. The cool
breeze by the cooler drops the temperature and creates a relaxing cooling effect.
Caution：If the water level is low or there is no water in the tank, do not activate
the "Cooler " function. Check first the water level and add clean water if needed,
also to replace the stale water. It is recommended to replace water in the tank at
least once in a week.
7. Remote：Remote control operates with CR2025 batteries.
Direct the remote control to the control panel of the evaporative air cooler. If
remote control is not working, first check the batteries. Replace them if needed.
If you are not going to use it for a long time, take out the batteries to prevent
damages that may occur due to battery leakage.
Operating the water tank
Check the level of water in the tank frequently. Be sure that water level is not below
the "MIN" marking which is located on the water tank. Activating the "Cool" function
with insufficient amount of water may cause malfunction of the water pump and
warranty of your product will be void.
Before refilling water, turn your unit to "Off" position by pressing the switch located at
the back panel and unplug the power cord.
Please see page 7 "water filling" article for refilling with water.
Using the ice boxes
In order to increase the cooling effect of your fan, you can use ice boxes which are
included with the unit. Before using, place them in the freezing compartment of your
refrigerator for a few hours. Then place them into the large section of the tank and
add water reaching "MAX" level. Utilizing ice boxes drops the temperature of the air
flow which will create more effective cooling effect.
Safety Precautions
1. Make sure this appliance and the power cord is not damaged before operating.
In case of damage, please consult your authorized technical service.
2. Unplug the power cord plug before taking out the water tank.
3. Do not insert any objects to the ventilation or exhaust opening for this may
Publicidad
