Descargar Imprimir esta página

Fora 6 Connect Manual Del Propietário página 11

Ocultar thumbs Ver también para 6 Connect:

Publicidad

Idiomas disponibles

Idiomas disponibles

• You think your blood sugar is low.
• You are not aware of symptoms when you become
hypoglycemic.
• The results do not agree with the way you feel.
• After a meal.
• After exercise.
• During illness.
• During times of stress.
To obtain a blood sample from the alternative sites, please
rub the puncture site for approximately 20 seconds.
1. Replace the lancing device cap with the clear cap.
1
2
2. Pull the cocking control out until the orange bar appears
on the release button window.
Important!
• Do not use results from alternative site samples to calibrate
continuous glucose monitoring systems (CGMS), or for
insulin dose calculations.
• Choose a different spot each time you test. Repeated
punctures at the same spot may cause soreness and
calluses.
• Avoid lancing the areas with obvious veins to avoid
excessive bleeding.
• It is recommended to discard the first drop of blood as it
might contain tissue fluid, which may affect the test result.
Performing A Test
1. Insert the test strip into the test slot of the device. Wait for
the device to display the test strip "
".
to adjust the measuring mode, and press MAIN
2. Press
button to confirm it.
• General Tests (
time since the last meal.
• AC (
) - no food intake for at least 8 hours.
• PC (
) - 2 hours after a meal.
• QC (
) - testing with control solution.
3. Obtain a blood sample.
Use the pre-set lancing device to puncture the desired
site. Wipe off the first appeared drop of blood with a clean
cotton swab. Gently squeeze the punctured area to obtain
another drop of blood. Be careful NOT to smear the blood
sample.
EN-9
" and blood drop "
) - any time of day without regard to

Publicidad

loading