Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
KIT COMPONENTS
• A) Radio trim panel A • B) Radio trim panel B • C) Radio brackets
A
B
Metra. The World's Best Kits.
®
Hyundai Sonata
*Visit MetraOnline.com for up-to-date vehicle specific applications.
KIT FEATURES
• ISO DDIN radio provision
• Painted matte black and silver
C
MetraOnline.com
2018-up*
© COPYRIGHT 2022 METRA ELECTRONICS CORPORATION
95-7383
I N S TA L L AT I O N I N S T R U C T I O N S
TABLE OF CONTENTS
Dash Disassembly . ..............................................2-3
Kit Preparation . ......................................................4
Kit Assembly ..........................................................5
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: Please visit metraonline.com
for wiring harness options
Antenna Adapter: Please visit metraonline.com
for antenna adapter options
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• Cutting tool
Attention!
With the key out of the ignition,
disconnect the negative battery terminal
before installing this product. Ensure that all
installation connections are secure before
cycling the ignition to test this product.
REV. 1/6/22 INST95-7383
Publicidad
Manuales relacionados para Metra 95-7383
Resumen de contenidos para Metra 95-7383
- Página 1 Ensure that all installation connections are secure before cycling the ignition to test this product. Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2022 METRA ELECTRONICS CORPORATION REV. 1/6/22 INST95-7383...
- Página 2 DASH DISASSEMBLY 1. Unsnap and remove the climate/ 3. Unclip and remove the panel below the hazard/clock panel. (Figure A) left a/c vent, then remove (1) Phillips screw. (Figure C) 2. Unsnap and remove the trim panel on 4. Unsnap the knee panel from under the the drivers side of the dash and then remove (2) Phillips screws. (Figure B) steering wheel. (no need to completely remove this panel). (Figure D) Continued on the next page (Figure A) (Figure C) (Figure B) (Figure D) 386.257.1187 MetraOnline.com...
- Página 3 DASH DISASSEMBLY (CONT.) 5. Unsnap and remove the panel above the instrument cluster. (Figure D) 6. Unsnap the top half of the steering column cover. (Figure E) 7. Remove (4) screws to remove the radio panel; (2) under the radio section, and (2) above the instrument cluster. (Figure F) Note: The top of the steering column cover will come with the large panel. 8. Remove (4) Phillips screws securing the (Figure D) (Figure E) (Figure F) radio and then remove the radio. Continue to Kit Preparation REV. 1/6/2022 INST95-7383...
- Página 4 KIT PREPARATION Attention! The factory panel will be permanently modified after following these steps. 1. Remove (4) Phillips screws securing the bottom of the vents, then unsnap and remove them. 2. Remove (7) Phillips screws securing the radio trim panel to the radio panel, then remove the trim panel. (Figure A) 3. Cut the opening as shown (front of dash (Figure A) panel shown) to allow room for the new radio trim panel. (Figure B) 4. Attach the radio trim panels to the radio panel, then secure with the (7) factory screws. (Figure C) (Figure C) Remove shaded area Continue to Kit Assembly (Figure B) 386.257.1187 MetraOnline.com...
- Página 5 KIT ASSEMBLY Secure the radio to the radio brackets using the screws supplied with the radio. (Figure A) Locate the factory wiring harness and antenna connector in the dash, and complete all necessary connections to the radio. Metra recommends using the proper mating adapter from Metra and/ or AXXESS. Test the radio for proper operation. 3. Secure the completed assembly into the dash using the factory screws. Reassemble the dash in reverse order of disassembly to complete the installation. (Figure A) REV. 1/6/2022 INST95-7383...
- Página 6 386.257.1187 MetraOnline.com...
- Página 7 REV. 1/6/2022 INST95-7383...
- Página 8 Log onto www.installerinstitute.edu or call 386-672-5771 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2022 METRA ELECTRONICS CORPORATION REV. 1/6/22 INST95-7383...
- Página 9 Asegúrese de que todas las conexiones de instalación estén seguras antes de realizar un ciclo de encendido para probar este producto. Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2022 METRA ELECTRONICS CORPORATION REV. 1/6/22 INST95-7383...
- Página 10 DESMONTAJE DEL TABLERO 1. Suelte a presión y quite el panel de 3. Desenganche y quite el panel que está clima / peligros / reloj. (Figura A) debajo de la rejilla izquierda de aire acondicionado. Después, quite el (1) 2. Suelte a presión y quite el panel de tornillo Phillips.
- Página 11 DESMONTAJE DEL TABLERO (CONT.) 5. Suelte a presión y retire el panel de arriba del conjunto de instrumentos. (Figura D) 6. Suelte a presión la mitad superior de la cubierta de la columna de dirección. (Figura E) 7. Quite los (4) tornillos para quitar el panel del radio;...
- Página 12 PREPARACIÓN DEL KIT ¡Atención! Se modificará permanentemente el panel de fábrica después de haber realizado estos pasos. 1. Quite los (4) tornillos Phillips que fijan la parte inferior de las rejillas. Después, aflójelos a presión y quítelos. 2. Quite los (7) tornillos Phillips que fijan el panel de moldura para radio al panel del radio.
- Página 13 Después, termine todas las conexiones necesarias al radio. Metra recomienda el uso de adaptadores de acoplamiento adecuados de Metra o de AXXESS. Pruebe el radio para asegurarse de que funciona bien. 3. Sujete el ensamble completo al tablero utilizando los tornillos de fábrica.
- Página 14 386.257.1187 MetraOnline.com...
- Página 15 REV. 1/6/2022 INST95-7383...
- Página 16 Log onto www.installerinstitute.edu or call 386-672-5771 for more information and take steps toward a better tomorrow. Metra recomienda MECP técnicos certificados Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2022 METRA ELECTRONICS CORPORATION REV. 1/6/22 INST95-7383...