Publicidad
Idiomas disponibles
Idiomas disponibles
Note: If there is no care advice on the piece of clothing, then you should begin ironing with the lowest
temperature.
OFF
●
●●
●●● MAX
DRY IRONING
1.
Place the iron on the thermal insulation stand of the unit base. Ensure that the steam button is not locked.
2.
Connect the iron to a suitable mains supply outlet.
3.
Select the setting on the temperature regulator.
4.
When the indicator light goes off (about 1 minute), the required temperature is reached. The iron is ready
for use.
5.
To turn off the iron, turn the temperature regulator counter-clockwise to position "OFF". Put the iron back
onto the unit base, and pull out the power plug.
Warning: Never touch the hot soleplate at any time before cooling down!
STEAM IRONING
1.
Put the unit base on a stable and level surface.
2.
Fill the water tank with water through the filling aperture. (Refer to "How to fill water" in "BEFORE INITIAL
USAGE"). The max capacity of water tank is 1.5L, the water level shall not exceed the "MAX" mark on the
water tank.
3.
Place the iron on the thermal insulation stand of the unit base. Ensure that the steam button is not locked.
4.
Connect the plug to the wall outlet. Turn the temperature regulator to select your desired temperature
setting (Steam can only be triggered in setting "●●●MAX"). The iron starts heating and the temperature
indicator illuminates.
5.
When the indicator light goes off, the required temperature is reached. The iron is ready for use.
6.
Press and hold the steam button for steam ironing; steam starts coming out from the holes in the soleplate
while ironing. The max steam output is 200g.
Press the steam button lock downward to lock the steam button for continuous steam.
7.
Vertical steam function: the steam function can also be applied when holding the iron in vertical position,
which is useful for removing creases from hanging clothes, curtains, etc.
8.
To turn off the iron, turn the temperature regulator counter-clockwise to position "OFF". Put the iron back
onto the unit base, and pull out the power plug.
Cord winding groove
When not in use, the steam supply hose can be winded along the cord winding groove for storage.
Iron lock device
When not in use, or when you want to move the appliance, the iron can be lock onto
the unit base by pressing the lock button. Press the unlock button to release.
Cautions:
1) Do not touch the hot soleplate at any time before cooling down!
2) Never direct the steam at people!
3) Do not activate the steam button when the iron is placed on the unit base to avoid being scalded by steam.
4) After ironing, the soleplate is still hot. Never touch it with hand and place it on the thermal insulation stand
until it cools down completely.
Off
Synthetic
Silk, wool
Linen, cotton, highest temperature
- 6 -
Publicidad
