Publicidad
Idiomas disponibles
Idiomas disponibles
LOW TEMPERATURE PROTECTION FUNCTION
In order to prevent water leak from the soleplate if too low temperature has been selected, the product is
designed with a low temperature protection function. The pump will not work while press the steam button if
the temperature is set below setting "●●●".
BUILD IN ANTI SCALE SYSTEM
The build-in anti-scale cartridge is designed to reduce the build-up of limescale which occurs during steam ironing.
This will prolong the working life of your iron. However, please note that the anti-scale cartridge will not
completely stop the natural process of limescale build-up.
CLEANING
Before cleaning the iron ensure it is disconnected from the power supply and has completely cooled down.
⚫
Deposits on the soleplate may be removed with a rough cloth soaked in a vinegar water solution.
⚫
The casting and base unit may be wiped with a damp cloth and then polished with a dry one.
⚫
Do not use abrasives on the soleplate.
⚫
Keep the soleplate smooth. Avoid hard contact with metal objects.
⚫
IRONING TIPS
-
The iron heats up quicker than cooling down. Therefore, you should start ironing the articles requiring the
lower temperature such as those made of the synthetic fiber.
-
If the fabric consists of various kinds of fibers, you must always select the lowest ironing temperature to iron
the composition of those fibers.
-
Synthetic fiber and silk fabrics should be ironed on their inner side to avoid being shone.
-
Velvet and other textures that rapidly become shiny should be ironed in one direction with light pressure
applied. Always keep the iron moving at any moment.
-
Pure wool fabrics (100% wool) may be ironed with the steam ironing. Use a dry cloth as a mat and then select
the corresponding fabric setting for ironing.
-
Never iron over zip, rivet in the cloth. This will damage the soleplate. Iron around any such object.
NOTE: When ironing woolen fabrics, shining of the fabric may occur. So it is suggested that you should turn the
article inside out and iron the reverse side.
If problems occur?
Brown streaks come
through the holes in
the soleplate and
stain the linen.
The soleplate is dirty
or brown and can
stain the linen.
The
soleplate
is
scratched.
TECHNICAL DATA
Operating voltage: 220-240V ~ 50-60Hz
Power: 2200W
You are using chemical descaling
agents.
Fabric fibers have accumulated in
the holes of the soleplate and are
burning.
Your linen has not been rinsed
sufficiently or you have ironed a new
garment before washing it.
You are ironing with a too high
temperature.
You have placed your iron flat on a
metal rest-plate or ironed over a zip.
Do not add any descaling agents to the water.
Let the iron cool down and clean the soleplate
with a sponge. Vacuum the holes of the
soleplate from time to time.
Make sure that your laundry is rinsed
sufficiently so as to remove any deposits of
soap or chemical products on new clothes.
Let the iron cool down and clean the soleplate
with a sponge. Select the appropriate program.
Always set your iron on its heel.
Do not iron over zips.
- 7 -
Publicidad
