Publicidad
Idiomas disponibles
Idiomas disponibles
• Day program: Day program has three
kinds of working modes:
• Comfort mode :(
content displayed as
range from 10 ºC ~ 35 ºC.
• Economic mode: (
content displayed as
range of 10 ºC ~ 35ºC. The temperature
should be no higher than comfort
temperature.
• Anti-frost mode: (
content displayed empty), 7ºC is fixed.
• If a daily program was chosen for the
work program, the unit will repeat the
program every day.
• To see the factory pre-set programs,
please go to images 11-19 on pages 6-7.
• Date: 1 (Monday)
• Clock: 00:00
• Anti-frost: 7ºC
• Free mode temperature: 10 ºC
• Comfort: 22 ºC
• Economy: 17 ºC
• Weekly Program: 1 ~ 5 (Mon-Fri): P1
• 6 (Saturday): P2
• 7 (Sunday): P3
Note: when pressing
the unit will come back on to the factory
pre-sets.
• Time setting: Same as previously, then
the unit will automatically adjust to the
current time and running accordingly.
• Temperature setting
• Hold the
until the
the same time the original comfort
temperature will start to blink.
• Press
or
target comfort temperature.
and program
), Adjustable
and program
), Adjustable
and program
to power on,
button for 3 seconds
symbol blinks, at
buttons to set the
• Press
to confirm, and the
symbol will start to blink, the original
economy temperature also starts to
blink.
• Press the
or
target economy temperature.
• Use
to confirm it temperature
setting is completed, the unit come
back to run under comfort mode.
• The temperature will then be kept
into the memory.
• Setting Daily program: Amending a
pre-set program to your set times
• Press the
program from
to set.
• Then hold the
seconds to enter the program setting
and at this time
displayed on the screen.
•
Will be shown until the setting
is completed, and the heating will stop
during the setting.
• The date does not show and the time
is 00:00.
• The mark
• First segment of selected program,
such as image 20 on page 8 (when the
selected daily program is P1).
• Then press
(back) to copy the mode into every
segment.
• Finally press
program and exit program setting.
•
Will disappear and the unit
comes back to normal working mode.
• The new program will be kept into
the memory and replace the original
program.
• Weekly program: You may select week
program. The first use will be as image
buttons to set the
button to choose the
~
that you want
button for 3
will be
starts to blink rapidly.
(forward), or
to confirm the
EN
39
Publicidad
