Metra 95-7393B Instrucciones De Instalación página 3

1. Secure the radio brackets to the radio
using the screws supplied with the radio.
(Figure A)
2. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio. Metra recommends using
the proper mating adapter from Metra
and/or Axxess. Test the radio for proper
operation.
3. Secure the radio assembly to the dash
using the factory screws.
4. Reassemble the dash in reverse order of
disassembly using the 95-7393B radio
trim panel to complete the installation.
KIT ASSEMBLY
(Figure A)
3
REV. 1/7/2022 INST95-7393B