Publicidad
Idiomas disponibles
Idiomas disponibles
Ref.: EV-203
Dorso Evotec
The manufacturing date is included in the batch number which can be found on the packaging
EN
x
label as
, in the following way: the second and third digits represent the year of manufacture and
the fourth and fifth digits represent the month.
ORLIMAN S. L. U.
C/ Ausias March, 3 - Pol. Ind. La Pobla-L´Eliana
Apdo. de correos 49 · C.P.: 46185
La Pobla de Vallbona Valencia - España (Spain)
Tel.: +34 96 272 57 04 - Fax: +34 96 275 87 00
Tel. Exportación: +34 96 274 23 33
E-mail: orto@orliman.com · Export mail: export@orliman.com
www.orliman.com
EV-203
Fecha de emisión/Date of issue: 2021-09
Fecha de revisión/Revision date: 2022-02 | v.02
USE AND MAINTENANCE INSTRUCTIONS
INSTRUCTIONS FOR USE, STORAGE AND WARRANTY
Dear Customer,
Thank you very much for placing your trust in an Orliman
product. Please read the instructions carefully. Keep these
instructions and the packaging for future reference. If you
have any questions or concerns, please contact your doctor,
orthopaedic specialist or our customer service department.
ORLIMAN S.L.U. guarantees all its products as long as the
original configuration has not been manipulated or altered
except for the intended use as described in these instruc-
tions.
If the products are used in combination with other prod-
ucts, replacement parts or systems, make sure they are
compatible and made by Orliman
any products with altered characteristics due to improper
use, defects or breakage of any kind. The statutory regula-
tions of the country of purchase apply. Please first contact
the retailer from whom you obtained the product directly
in the event of a potential claim under the warranty. If any
serious incidents related to the product occur, notify Orli-
man S.L.U. and the corresponding competent authority in
your country.
Orliman would like to thank you for choosing this product
and hopes you a speedy recovery.
REGULATIONS
d
This article is defined as a class I medical device. A Risk
Analysis (UNE EN ISO 14971) has been carried out, min-
imising the existing risks. Tests have been in accordance
with European Regulation UNE-EN ISO 22523 on Prosthe-
ses and Orthoses.
INDICATIONS
®
Specially indicated in patients affected by kyphotic atti-
tudes, vertebral wedging, dorsolumbar traumatisms, in-
fectious illnesses which affect the dorsal rachides, slipped
disks, postoperative, osteoporosis and in all those cases in
which the object is the correction of the kyphotic curve, and
the antepulsion of shoulders. Some lower dorsalgias T-8,
T-12, associated with lumbalgias, require temporary immo-
bilization (movement of the patient, domestic and work-re-
lated mechanical efforts, etc.). In those cases in which they
partially need thoracic contention at some time of the day,
depending on the activity. The dorsal module can always
adapt upon an Evotec lumbrosacral support.
FITTING INSTRUCTIONS
For best therapeutic results considering different patholo-
gies and to extend the useful life of the product, it is es-
sential to choose the correct size for each patient or user.
Excessive compression may be intolerable; adjusting the
compression to be firm yet comfortable is recommended.
If the product must be adapted, any such adjustments must
be done by an orthopaedic specialist or healthcare profes-
sional legally certified to do so who must make sure the end
user or person responsible for fitting the product properly
understands how it works and should be used.
When fitting the product, you must adhere to the
following instructions:
Putting on the Dorso Evotec :
The dorsal piece is designed to be put on in combination
with the Evotec high and low girdle.
Once the model and the correct size for the patient are se-
lected, we can assemble the dorsal piece with the Evotec
girdle. Prior to this, the lumbar pad must be removed from
the girdle, as it is not possible to put it on together with the
Dorso Evotec.
1-2: Place the Evotec girdle upon a smooth surface and
open it completely; then stick on the dorsal piece , with
the internal velour of the evotec and the microhook of the
Dorso Evotec, making sure that the 2 central stays of the
girdle coincide with the 2 central stays of the dorsal piece,
always starting to join from the lower part of the lumbar
girdle; the height can be regulated from a minimum of 47
cm to a maximum of 53 cm in the low model and from a
minimum of 47 cm to a maximum of 57 cm in the high
model.(see drawing).
This will allow us to have a contact and adherence area that
is large enough for both pieces to be stable together. If we
wish to increase the height, the area of adherence will be
minimal, losing solidity in the combination of both com-
ponents.
3-4-5: Once both pieces are adhered at the desired height,
adapt it to the patient, starting by fastening the abdominal
microhook lock until the desired compression is obtained.
Then, pull the side lumboabdominal tensors until obtaining
the desired compression, fastening them to the front of the
girdle with the microhook lock.
6: Pull the straps over the shoulders and under the axilla,
crossing them over the back and up to the abdomen, join-
ing them together with the lock system.
7-8: Regulation of the length of the straps:
At its end, together with the lock ring, it has an adhesive
system which, when removed, will leave the end of the
cinch free; the excess length can then be cut (see drawing).
Once this operation is carried out, join the end again to the
adhesive system.
9: Last, adjust the lock, joining both rotational buckles, and
stretching until hearing a click. The adjustment of this lock
must be on the central front part of the Evotec girdle.
Adaptation of the module in Evotec Forte thermoplastic
with the Dorso Evotec dorsal piece:
A We will first joint the 2 side-fastening cinches to the
Dorsal piece.
B We will then join the thermoplastic module to the dor-
sal piece, with the adhesive surfaces of both modules
to fasten them laterally with the 2 microhook fasten-
ing cinches attached to the thermoplastic module. The
. It does not guarantee
®
height may be regulated from a minimum of 47 cm to a
maximum of 53 cm in the low model and of 47 cm to a
maximum of 57 cm in the high model.
C Then adapt the Evotec girdle, clasping both compo-
nents (thermoplastic module and dorsal module), thus
proceeding to lock it, following the steps described
previously in the placement of the Dorsal piece, from
point no. 3.
4-
p
PRECAUTIONS
Before each use, check that all product components are
present as per the fitting process. Periodically check the
conditions of the product. If you observe any defect or
anomaly, immediately report it to the issuing establish-
ment.
This product is made of inflammable material. Do not
expose the products to situations that could set them on
fire. In the event of a fire, quickly get them off your body
and use the proper resources to extinguish the fire.
To avoid minor discomfort caused by sweating, we rec-
ommend using some type of cotton fabric to separate
the skin from contact with the product material. For dis-
comfort such as chafing, irritation and swelling, remove
the product and see a doctor or orthopaedic specialist.
The product should only be used on healthy skin. It is not
recommended for use over open scars with swelling, red-
ness or hotspots.
Products marked with the
rubber latex and can cause allergic reactions in people
sensitive to latex.
Products marked with the
netic components and, therefore, extreme precaution
must be taken if you undergo an MRI scan or are exposed
to radiation associated with diagnostic or therapeutic
procedures.
RECOMMENDATIONS-WARNINGS
The use of these products is conditioned by the indications.
Although the product is not defined as a single-use device,
using it on a single patient only is recommended and only
for the intended purposes as described in these instructions
or by a healthcare professional.
When disposing of the product and its packaging, you must
strictly adhere to the legal regulations in your community.
RECOMMENDATIONS FOR STORAGE AND WASHING
When not using the product, store it in the original pack-
aging in a dry place at room temperature. Stick the Velcro
to each other (if the orthotic device has them), frequently
wash by hand with warm water (30º C max.) and mild soap.
To dry the product, use a dry towel to absorb as much mois-
ture as possible and let it dry at room temperature. Do not
hang it up or iron the product and do not expose it to direct
heat sources such as stoves, dryers, direct sun exposure, etc.
When using or cleaning the product, do not use abrasive or
corrosive substances, alcohol, ointments or liquid solvents.
If not dried off properly, the detergent residue may irritate
the skin and cause the product to deteriorate.
t o y m U
ENGLISH
l
symbol contain natural
o
symbol contain ferromag-
Publicidad
