Profi Care PC-HSM/R 3051 Manual De Instrucciones página 20

The relevant load conditions are as follows:
Percentage of nameplate output current
Load condition 1
Load condition 2
Load condition 3
Load condition 4
Load condition 5
Load condition 6
Removing the Rechargeable Batteries
This appliance is equipped with rechargeable Ni-MH batteries. Remove the
battery before disposing of the appliance.
As a consumer you are legally bound to return exhausted batteries /
rechargeable batteries.
WARNING:
Disconnect from mains power supply before removing the batteries!
1. Remove the shaving head.
2. Use a small crosshead screwdriver to remove the screws inside the appliance.
3. Pry both halves of the housing apart using a screwdriver, thereby destroying the
appliance.
4. Remove the rechargeable batteries.
5. Cut the wires to the rechargeable batteries with a pair of scissors.
Return the batteries to a collection point for waste batteries or hazardous waste. Ask
your municipality for further information.
20
PC-HSMR3051_IM_new2
100 % ± 2 %
75 % ± 2 %
50 % ± 2 %
25 % ± 2 %
10 % ± 1 %
0 % (no-load condition)
Disposal
27.12.22