FUXTEC FX-RM5170 Manual De Instrucciones página 51

Original-Bedienungsanleitung FUXTEC Benzin-Rasenmäher FX-RM5170 / RM5170eS
Always use a torque spanner when installing the blade.
Check that the blade screws are tight.
If you remove the blade for sharpening or replacement, you will need a torque spanner for
installation. Wear suitable work gloves to protect your hands.
Remove the screw with a socket spanner. Then remove the blade. Use a wooden block to
-
prevent the blade from turning when removing the screw.
Mount the blade with the blade screw and the special washers. Make sure to install the special
-
washers with the concave side towards the blade and the convex side towards the screw.
Tighten the blade screw with a torque spanner. Use a wooden block to prevent the blade
-
from turning when tightening the screw.
Knife holder
Knife
Knife holder screw
Using the Easy Clean function
On the left side of the mower, you will find a water connection for washing the mower on some
models.
When using the water connection, the device must be in the lowest height position on the lawn. That
ensures that the water remains under the mower during cleaning.
• Connect a hose to the nozzle.
• Turn on the water and start the engine.
• The rotations of the blades ensure that the water cleans the underside of the mower.
Washer
51