Replacing The Ac Fuse; Replacing The Dc Plug Fuse; Replacing The Light Bulb - Dometic CF Serie Instrucciones De Uso

Operation
7.9

Replacing the AC fuse

!
WARNING! Danger of electrocution!
Disconnect the connection cable before you replace the device fuse.
➤ Pull off the connection cable.
➤ Pry out the fuse insert (fig. 3 2, page 3) with a screwdriver.
➤ Replace the defective fuse with a new of the same type and rating
(T2.5AL 250 V).
➤ Press the fuse insert back into the housing.
7.10

Replacing the DC plug fuse

➤ Pull the adapter sleeve (fig. 6 4, page 5) off of the plug.
➤ Unscrew the screw (fig. 6 5, page 5) out of the upper half of the housing
(fig. 6 1, page 5).
➤ Carefully raise the upper half of the housing from the lower (fig. 6 6, page 5)
half.
➤ Take out the contact pin (fig. 6 3, page 5).
➤ Replace the defective fuse (fig. 6 2, page 5) with a new fuse of the same type
and rating (3AG, Fast Acting, 8 A).
➤ Re-assemble the plug in the reverse order.
7.11

Replacing the light bulb

➤ Press the switch pin (fig. 7 2, page 5) downwards so that the transparent part
(fig. 7 1, page 5) of the lamp can be removed at the front.
➤ Replace the light bulb.
I
NOTE
The LEDs in the light bulb must be aligned with the transparent part of
the lamp.
➤ Press the transparent part of the lamp back into the housing.
20
CoolFreeze
EN