Sordin SUPREME PRO 75302-X-08-S Manual Del Usuario página 24

SUPREME PRO LINE
GB US CAN
PRODUCT FEATURES
The product is designed to protect against harmful noise. Supreme is a hearing protector equipped with
electronics for reproducing ambient sound. Two externally mounted microphones picks up the ambient
sound (figure A1). Speakers inside the hearing protector reproduce the sound in stereo. The sound
reproduction is limited to a maximum of 82 dB(A) to prevent damage to hearing. Supreme is part of a
range of products developed to improve your working environment or leisure whenever you are exposed
to noise. To ensure your complete satisfaction with the product it is important that you read the user's
instructions carefully. If this product does not meet your expectations, please return it without delay to
the point of sale and your money will be refunded. Note! This guarantee will be invalidated if the product
has been in use.
PRO LINE:
Supreme Pro Headband: 75302: Pro version, headband and water protected.
Supreme Pro-X Headband: 75302-X: Pro version, headband and waterproof.
Supreme Pro-X LED Headband: 75302-X LED: Pro version, headband, waterproof and led light function.
Supreme Pro Neckband: 76302: Pro version, neckband and water protected.
Supreme Pro-X Neckband: 76302-X: Pro version, neckband and waterproof.
Note! All models might not be available on all markets.
USER'S INSTRUCTIONS
PRO LINE: ACTIVATING THE HEARING PROTECTOR/BATTERY INSTALLATION/REPLACEMENT (figure C)
The hearing protector requires two standard alkaline 1.5V AAA/LR03 batteries. Rechargeable batt-
eries, for example NiMH 1.2 V or NiCd 1.2 V, should not be used as they may significantly reduce the
operating time of the product. The batteries are protected from moisture and dirt by our unique battery
compartment. You can easily install and replace batteries by following the instructions (figure C):
Unscrew the battery cover. Insert the first battery with the (–) pole facing inwards. Shake the earmuff
lightly so that the battery falls into place inside the earmuff. Then insert the second battery with the
(+) pole facing inwards. Refit the battery cover. Note! Always switch off the product before replacing
batteries. Make sure that the batteries polarities are inserted correctly and secure that the battery lid is
completely tightened.
FUNCTION KEYS (figure D)
On and off, (O)
Press key (O) to activate the electronic functions. To switch off, hold the same key (O) pressed in for 1
second.
Volume adjustment, (+/-)
Short presses on the volume keys adjust volume of the ambient sound, i.e., down (–) or up (+). The volume
starts in the mode at which it was switched off. The volume can be adjusted in six steps. The output signal
from the sound reproduction system of the product will not exceed known risk levels for damage to
hearing. Sound via the speakers is limited to maximum 82 dB(A) equivalent sound level.
Battery–saving mode
This product is provided with a battery economy function to ensure maximum life of the batteries. The
function automatically switches the product off after 4 hours if no key is activated during this period. To
restart, push the key located at the middle of the keypad (O). About 2 minutes before automatic switch-off
a tone will be heard as a warning that the product will be switched off. Press any key to delay the switch-
off by a further 4 hours.
HEADBAND VERSION
Folding the hearing protector (figure E)
Extend the headband as far as it will go. Then press the top of the headband to fold the hearing protectors
together. Make sure that the cushions lie flat against each other and that there are no creases in them.
Note! Do not store the hearing protectors in this positions.
24