Sordin SUPREME PRO 75302-X-08-S Manual Del Usuario página 26

Communication (Comms)
• Passive sound attenuation only
• AUX input on, enabling connection to communication radios by 3.5 mm AUX cable without the
ambient sound.
• User situations: High noise environments
When switched on, set the min volume and then long press the – button (figure D) until 3 short low-pitch
beeps are heard.
Note! If the hearing protector is switched off in Focus or Comms audio profiles, the start mode will return
to Hunting when switching the hearing protector on next time.
MAINTENANCE
The outside of the muff and the cushion can easily be cleaned with soap and water. Earmuffs and in
particular cushions may deteriorate with use and ageing and should be inspected regularly for cracks and
leakage. The cushions are filled with foam or gel and are replaceable. Worn or damaged parts are easily
replaced (figure B). Use only hygiene kits from the manufacturer, designed for electronics, order number
60089-S or 60092-S. The hygiene kit should be replaced at least twice a year for standard use to ensure
that the noise attenuation performances are maintained. The fitting of hygiene covers to the cushions
may affect the acoustic performance of the hearing protectors. This product may be adversely affected
by certain chemical substances. Further information should be sought from the manufacturer.
The user must ensure that the hearing protector:
• fits properly and is adjusted and maintained in compliance with our instructions
• are worn at all the time in noisy environments
• is inspected regularly to ensure good condition.
Moisture may occur inside the hearing protector muffs if used for long periods. To avoid long term affects
of moisture on the electronic components it is recommended that the acoustic inserts are regularly
removed to allow the muffs to dry, e.g., overnight (figure B). When removing the cushion and insert
take great care not to touch the electronics board or cables. Changes in position of cables could cause
disturbance in the system. Do not subject the hearing protector to rough handling, which can damage
the electronics.
The hearing protectors must not be immersed in water!
STORAGE
When the hearing protector is not in use, the headband or neckband should not be extended or the
cushions compressed. Keep the muffs dry and clean and keep them in normal room temperature. Do not
allow the hearing protector to lie in direct sunlight. If the product is to be stored for a longer period it is
recommended that the batteries be removed from the battery holder to prevent damage. If the above
recommendations for the hearing protectors are not adhered, the attenuation values ability could
deteriorate considerably.
LIMITED TROUBLE SHOOTING/CARE ADVICE
If the electronics cease to function it may be easy to rectify the problem. Please check the following:
• Replace the batteries with new ones.
• Ensure that the batteries are correctly fitted in the hearing protector.
• Ensure that the battery plates make good contact with the batteries.
• Ensure that the battery plates have not become coated with verdigris.
If these measures do not help, consult the point of sale.
WARNING!
• The noise attenuation of the product will be severely impaired if you do not follow the instructions
in this operator's manual.
• The wearer should ensure that the hearing protectors are worn at all times in noisy environments.
• When exceeding the specified limits a risk of hearing impairment exists.
• This hearing protector is not aimed to be used with entertainment devices.
• These hearing protectors reproduce ambient sound electronically. The user must check the function
before using the product. If distortion or other fault is detected, follow the instructions for changing
and maintenance of the batteries. If this does not help, consult an authorized agent.
26