Publicidad
Idiomas disponibles
Idiomas disponibles
en-us_main.book.book Page 50 Monday, February 20, 2023 2:02 PM
50 MAINTENANCE
4
Remove the pump filter.
• Twist the pump filter counterclockwise to
remove.
5
Clean the pump filter and opening.
6
Reassemble the plug onto the drain hose and
reclip the drain hose.
7
Insert the drain pump filter and twist it
clockwise.
8
Close the drain pump filter cover.
NOTE
• An
message blinks on the display when the
OE
drain pump filter is clogged with dirt. Clean the
drain pump filter.
Care in Cold Climates
Storing the Appliance
If the washer will not be used for an extended
period of time and is in an area that could be
exposed to freezing temperatures, follow these
steps to protect the washer from damage.
NOTE
• Make sure the drum is empty before following
these steps.
1
Turn off the washer, and unplug the power
cord.
2
Turn off the water faucets.
3
Disconnect the water inlet hoses. Drain any
water from the hoses.
4
Plug the power cord into a properly grounded
electrical outlet.
Publicidad
