PROBLEM
No coffee comes out.
Indicator light D blinks RED.
The coffee is not hot
enough.
The lever cannot be
lowered.
Indicator light F is lit steadily
in RED.
When a button is pressed
to dispense coffee, the
machine seems to work
but then stops without
dispensing any coffee,
or only dispenses a tiny
amount.
Coffee is dispensed very
slowly, and is of poor quality.
See the data plate on the
base of the machine.
1 litre
ambient temperature:
10°C ÷ 40°C
370 mm
162 mm
English
Troubleshooting
POSSIBLE CAUSE
The water tank is empty.
- Cold cups / espresso cups.
- Scale build-up in machine.
- The used capsule drawer
is full.
- Capsule stuck inside the
machine.
Heating problems.
Incorrect quantity
programming.
Button C was used with an
espresso capsule.
Technical data
About 4 kg
Max. 15 bar
< 70dB A
13 capsules
283 mm
370 mm
SOLUTION
Fill the tank with fresh water.
Press a button to refi ll the circuit.
When the buttons remain steadily
lit, the appliance is ready for use.
- Preheat cup.
- Descale.
- Empty out the used capsule
drawer.
- Remove the used capsule.
Turn off the machine, then turn it
back on. If the problem persists,
take the machine to an Authorised
Service Centre.
Reprogram the quantity
associated with that button.
See ch. "Programming the
quantity of coffee in a cup".
Use buttons A or B.
The materials and
objects in contact with
food products comply
with the requirements
of European Regulation
1935/2004.
21