Publicidad
Idiomas disponibles
Idiomas disponibles
•
When the target humidity is 10% RH to 15% RH higher than the current
humidity, the humidifier will operate at mist level 2.
•
When the target humidity is 1% RH to 9% RH higher than the current
humidity, the humidifier will operate with a mist level of 1.
•
When the target humidity is lower than the current humidity, the
humidifier will go into standby mode (The timer will continue to run).
When the target humidity is higher than the current humidity, the
humidifier will start working again.
When the target humidity is set, the display will alternate between the current
humidity and the target humidity (slow blink).
6.
In standby mode, press and hold the "HUMIDITY" button
seconds to turn on the night light. Press and hold again to turn off.
The colour of the night light is blue and is emitted from the bottom of
the equipment. This blue light is NOT UV light; it is completely safe.
While the humidifier is running, press and hold the button to put the
device into night mode. In this way, the night light and the screen will
turn off. Touch any button to turn on the screen (the night light will
remain off), then press any other button to deactivate the night mode
and keep the screen on. If you don't do the second tap, the screen will
turn off after 15 seconds. Press and hold again to exit night mode.
7.
Touch the "TIMER" button
(Press the button until the display shows "-", to cancel the timer.)
Once the time is set, the display will blink three times and then it will
stay on, this means that the timer has been set. The display will show
the current humidity and the timer alternating every minute.
The timer shows the remaining time, that is, if we select 12 hours, after
one hour, the display will show 11.
Note: You can also press and hold the "TIMER" button for two seconds
to cancel it.
to set a run time from 01 to 12 hours.
20
for 2
Publicidad
