Wear protective gloves when changing a tool or an accessory!
Notice: Defective/ inappropriate gloves can lead to injury. Wear only proper hand
protection, adapted to the work place requirements
WARNING – Explosion hazard!
When operating the machine in areas exposed to explosion hazards, use only
accessories, respectively devices, which are ATEX approved and specified.
SAFETY INSTRUCTIONS FOR PREVENTION
ATTENTION – Improper Transport, danger of life due to parts falling down!
Damage of the machine!
• Separate the machine form any external energy source before transportation.
Check that the machine is undamaged and in proper condition.
• Never carry the machine at the supply line.
Wear worker's protective shoes!
Basic Safety Instructions:
WARNING – Maintenance and repair work on pneumatic equipment.
Compressed air can cause severe injury. Observe legal regulations. Take
precautions for persons and environment. Additionally, observe the following:
• Secure machine against unintentional starting and let the machine cool down to
the ambient temperature.
• Protection against tipping, tumbling or falling down when assembling/
disassembling the machine/parts.
CAUTION – Skin exposure to hazardous dusts may cause severe dermatitis.
Dust present at the work place could be disturbed during the maintenance
procedure and inhaled. Clean machine and work place before maintenance work
WARNING – Danger of explosion! Generation of sparks during maintenance
work!
Observe local safety regulations. Avoid use of force when disassembling and
assembling the machine. Always do maintenance work outside areas which are
not exposed to explosion hazards.
OF TRANSPORT HAZARDS
SERVICE AND MAINTENANCE
PROHIBITION – Eating, drinking and smoking are forbidden during
operation.
41