Publicidad
Idiomas disponibles
Idiomas disponibles
1 0
H S
Standing bracket 1
t a n
Standing bracket_1
d in
g T
y p
e
Battery Module B
n t
R e a
F r o
r
Label
SH077064P8S8XXX
Wall
Battery Module Direction
R e a
r
n t
F r o
Battery Module A
F r o
n t
n t
F r o
SH077064P8S8XXX
Label
Wall
Battery Module B
Rear
Front
Battery Module A
TOP VIEW
Module Support BRKT
3.
Standing bracket 1 on the wall.
4. Place Battery Module B on the rear
side of Module Connect plate.
* The side without bolts is the front
of the Battery Module.
*
battery pack is of B. Label is
attached on the left side of Battery
Module.
5. Place Battery Module A on the front
side of Module Connect plate. The
Rear side of each Battery Module
should face each other. After that,
remove the Spacer between the wall
and Battery Module.
*
Battery pack is of A. Label is
attached on the left side of Battery
Module.
6. Loosely assemble Module Support
BRKTs using 6 bolts each (Please do
not tighten the bolts all the way).
bolts (x12) with a torque of 5 N·m
(3.7 lbf·ft).
7. Remove bubble wrap from
Battery Control Unit
Battery Modules
8. Place the spacers on the position
Spacer
TOP
Spacer
(used for assmbly ang disassembly)
Spacer
Spacer
TOP VIEW
9. Place the Battery Control Unit on
Battery Control Unit
Battery Control Unit
* Be careful not to break the
connectors of Battery Control Unit
and the warning label of Battery
Modules.
marked with label on Battery
Modules.
top of the spacers, and align with the
Battery Module.
connector between the spacers and
the Battery Control Unit.
8
Publicidad
