Sanus VODLT1-B2 Manual De Instrucciones página 14

STEP 2 C Attach Wall Plate to Wall
(406 mm)
CAUTION
: Avoid potential personal injuries
and property damage!
● Studs must be at least 2x4 / 25 ga.
● If back side of wall is unfinished, drywall must be
installed to a minimum of one stud left and right of
the stud(s) being used to install the mount.
● Drywall must be a minimum of 1/2 in. (13 mm) thick on
each side of the studs, and a minimum clearance of 1
7/8 in. (48 mm)
behind the wall is required.
● This product must be centered on the studs.
● Stud type and structural strength must conform to
the North American Specification for the Design of
Cold-Formed Steel Structural Members
[362 S 125 18, C-Shape, S - Stud Section].
● Drywall must be secured to studs with screws 12 in.
(304.8 mm) on center.
14
Min. 16 in.
1
use the three middle slots for
mounting.
Steel Stud Option
Steel Stud Anchor Kit is NOT INCLUDED
Contact Customer Service:
US: +1 (800) 359-5520
EMEA: +31 (0) 495 580 852
UK: +44 (0) 800 056 285
to have the additional hardware shipped directly to you..
06
CAUTION
: DO NOT
2
1 in.
(25 mm)
1/2 in.
(13 mm)