Kingfisher CLCH60LKSS Manual De Instrucciones página 67

EN Use
Before you start
WARNING: READ THE INSTRUCTIONS BEFORE USING THE APPLIANCE.
Switch on the Residual Current Device (RCD) at the consumer unit. The appliance is ready for use.
EN Functions & Settings
01 Control Panel
To obtain the best results from your cooker hood it is recommended that you leave it switched on for up to
15 minutes after you have finished cooking.
To Set Up For First Use
IMPORTANT: COMPLETE THIS SET UP WITHIN TWO MINUTES OF TURNING
ON THE RESIDUAL CURRENT DEVICE (RCD).
Ducted Option : This is the factory default setting if you are extracting air to the outside.
Recirculation Option
To change to this option, press both Speed icons
Press the Speed Increase
revert back to the Ducted Option
confirm the change and the Timer
5059340446189_MNL_IN_V03.indb 66 5059340446189_MNL_IN_V03.indb 66
Light On/Off
Fan On/Off and Speed Reduction
LED Display
Boost Function and Speed Increase
Timer
: This is the option to be used with carbon filters.
to change to the Recirculation Option
. Finally, press both Speed icons
will stop flashing.
together and the Timer
and the Speed Reduction
66
will flash red.
together one more time to
8/6/2022 3:27 PM 8/6/2022 3:27 PM
to