Optika Italy B-1000 Serie Manual De Instrucciones página 7

7.1 Assembling the microscope
7.1.1 Manual version
1. Put the microscope stand on a solid table. Insert
fluorescence attachment above the stand, using
the Allen wrench to tighten the screw. (Fig. 1)
2. Insert the optical head above the attachment, us-
ing the Allen wrench to tighten the screw. (Fig. 2)
3. Insert eyepieces into the empty eyepiece sleeves.
(Fig. 3)
4. Insert the condenser under the stage: position
until it is well inserted into its holder (under the
condenser there is a pin that must fully enter the
holder guide). (Fig. 4)
5. Lock the condenser fixing knob ①.
Page 7
F ig. 1 F ig. 1
F ig. 2 F ig. 2
F F ig. 3 ig. 3
①
F ig. 4 F ig. 4