7.1.2 Motorised version
1. Assemble the stage in the same way as the
manual version. Check the perfect alignment of
the rear part of the stage with the rear arm of the
frame. An imperfect alignment could lead to an
incorrect functioning of the system. (Fig. 9)
2. Connect the cable ① from the stage to the frame
and tight the locking screws of the connectors ②.
(Fig. 10)
3. Connect the provided cables: ③ 12V power sup-
ply for the motorised parts; ④ 6V microscope
power supply; ⑤ serial cable; ⑥ PS/2 mouse.
(Fig. 11)
•
Connect power cables as the last step.
③ ④ ⑤ ⑥
Page 9
F ig. 9
F
ig. 9
②
①
F ig. 10
F
ig. 10
F ig. 11
F
ig. 11