Nilfisk T40PLUS Manual De Instrucciones página 27

Description of the machine
Machine Parts and Labels
Figure 1
1.
Identification plate which includes:
Code of the Model, Class, Technical Data (see table
on page 6), Serial N°, EC Mark, Year of manufacture,
Nominal network voltage.
2. Warning label
(For L, M, H version)
3. Warning plate
Draws the operator's attention to the fact that the filter
must only be shaken when the vacuum cleaner is off.
Failing this, the shaking would have no effect while the
filter itself could be damaged.
4. Vacuum inlet
5. Outlet
6.
Check valve (Clapet)
7. Vacuum unit
8. On/off switch
9. Vacuum hose
10. Band latch
11. Container release handle
12. Panel power plate
the panel is powered by the voltage indicated on the data
plate
The access to the panel is allowed to specialized personnel only
who, before touching the electrical equipment, must disconnect
the machine from its power source by turning the main switch
to 0 - (off) and by removing the plug from the electrical socket.
This machine creates a strong air flow which is drawn in through
the vacuum inlet and blows out through the outlet.
Before turning on the machine, fit the vacuum hose into the
inlet and then fit the required tool on to the end part (refer to the
manufacturer's accessory catalogue or Service Centre).
The diameters of the authorized hoses are indicated in the
Technical data table.
The machine is equipped with a primary filter which enables it
to be used for the majority of applications.
In addition to the primary filter that retains the most common
dust, a secondary filter (absolute filter) can be installed.
This machine is equipped with an internal baffle plate which
subjects the vacuumed substances to a circular centrifugal
movement that makes them drop into the container.
Figure 2
Vacuum cleaners for dust harmful to health are classified
according to different dust classification, in compliance with
standard EN 60335-2-69 – Annexe AA:
1. Class L label
2. Class M label
3. Class H label
The class H label reads the following.
and service the machine, including removing the
means used to vacuum the dust. Do not use without
the complete filter system in place.
Optional kits
Various optional kits are available for converting the machine.
On request, the machine can be supplied with optional kits
already installed. However, they can also be installed at a later
date.
Please contact the sales network for further details.
Instructions describing how to fit the optional kits and the
relative operation and maintenance manuals are supplied
together with the optional kits.
Indicates that
Use only supplied and authorised genuine spare parts.
Accessories
Various accessories are available; refer to the manufacturer's
accessory catalogue.
Use only genuine accessories supplied and authorised
by the manufacturer.
Packing and unpacking
All the dispatched equipment has been thoroughly checked
before being delivered to the haulage contractor.
On arrival, check the machine to see that it has not been
damaged during transport. In case of damage, immediately
lodge a complaint with the haulage contractor.
Dispose of the packing materials in compliance with the laws
in force.
Model
T40PLUS
T40WPLUS
5
T40PLUS - T40WPLUS
CAUTION!
This vacuum cleaner
hazardous for the health.
Only authorised personnel wearing suitable
personal protective equipment should empty
CAUTION!
CAUTION!
Figure 3
A (mm) B (mm) C (mm)
1350 700
1350 700
contains dust
GB
Kg
1850 190
1850 200
C380