Vermeiren LiNX 200 Manual De Instrucciones página 11

 To lock the system: press and hold the power button for 7 seconds.
When entering the locked state, the battery gauge will indicate the transition by
flashing LED's 1, 3, and 5 (far left, middle, and far right) 3 times.
 To unlock the system: press the power button once, and then press the horn
button twice — the horn button must be pressed twice within 10 seconds of
pressing the power button.
If the user does not execute the unlock sequence correctly, within the required
time frame, or the power button is pressed again before the unlock sequence is
complete, the system will return to the locked state.
During an unlock attempt, the battery gauge will indicate that the system is in a
locked state by flashing LED's 1, 3, and 5 (far left, middle, and far right) until either
the system is powered off, unlocked, or until the sequence timeout of ±10s is
reached and the controller switches off automatically.
4.6 Adjusting your body position
CAUTION
 Be aware that the stability decreases when the wheelchair is moved from sitting straight to
inclined position.
 Make sure that there is enough space around the wheelchair to operate the backrest and seat.
The wheelchair's adjusting functions can be operated using the adjusting function button.
Depending on your type of wheelchair, there can be up to 6 functions.

Press the top of the button to select the next adjusting function. Press the bottom
of the button to select the previous adjusting function.

To adjust your body position, move the joystick to the front or back.

To return to the basic sitting position, move the joystick to the back for each
adjusting movement.
The selected adjusting function is displayed on the actuator status indicator as shown below. The
display only shows the available/programmed functions in your wheelchair.
Adjust function
Seat inclination
Lift
Leg rest right
Risk of injuries or damage
Display
Position adjustment button
Adjust function
Backrest inclination
Leg rest left
Leg rests simultaneous /
central footplate
9
LiNX 200
2023-03
Operating console functions
Display
EN
NL