Publicidad
Idiomas disponibles
Idiomas disponibles
6. Faults
6. Faults
Personnel: Skilled personnel
EN
WARNING!
Physical injuries and damage to property and the environment
caused by hazardous media
Upon contact with hazardous media (e.g. oxygen, acetylene, flammable
or toxic substances), harmful media (e.g. corrosive, toxic, carcinogenic,
radioactive), and also with refrigeration plants and compressors, there is a
danger of physical injuries and damage to property and the environment.
Should a failure occur, aggressive media with extremely high temperature
and under high pressure or vacuum may be present at the instrument.
▶
▶
CAUTION!
Physical injuries and damage to property and the environment
If faults cannot be eliminated by means of the listed measures, the
instrument must be taken out of operation immediately.
▶
▶
▶
MR Service & Complaint Maschinenfabrik Reinhausen GmbH
Falkensteinstraße 8
93059 Regensburg
Germany
www.reinhausen.com
service@reinhausen.com
complaint@reinhausen.com
Faults
Instrument switches at
the wrong temperature
16
For these media, in addition to all standard regulations, the appropriate
existing codes or regulations must also be followed.
Wear the requisite protective equipment.
Ensure that pressure/temperature or signal is no longer present and
protect against accidental commissioning.
Contact MR Service & Complaint Maschinenfabrik Reinhausen GmbH.
If a return is needed, please follow the instructions given in chapter
8.2 "Return".
Causes
Switch point is set
incorrectly
Operating instructions for expansion thermometer, CEDASPE
Measures
Check the switch point, see
chapter 5.9 "Adjusting the set
pointer (with microswitch)"
After correction of the switch point,
the instrument still does not switch
correctly, contact Maschinenfabrik
Reinhausen GmbH
VT series
®
Publicidad
