Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY STEP 2 (continued)
12
D
C
4
3
1
HARDWARE FOR STEP 2
PART
B
BUTTON HEAD BOLT
C
SPRING WASHER
D
NOTE: Do not fully tighten bolts until step 5.
NOTE: Be careful not to pinch the console
cable while attaching the right console mast.
Pull the CONSOLE CABLE (3) out of the
A
B
treadmill base frame using the LEAD WIRE.
Attach CONSOLE CABLE to the CONSOLE
CABLE in the bottom of the mast. The other
end of the CONSOLE CABLE should be
located at the top of the mast. Detach and
discard LEAD WIRES.
B
Align the RIGHT CONSOLE MAST (4) so that
BOLT (A) sits in the NOTCHED HOLE in the
bottom of the CONSOLE MAST.
C
Attach CONSOLE MAST (4) to MAIN FRAME
BRACKET (1) using 4 BOLTS (B), 4 SPRING
WASHERS (C), and 4 FLAT WASHERS (D).
TYPE
QTY
8
8
FLAT WASHER
8
Publicidad
Tabla de contenido
