Wesco WS4151 Manual Del Usuario página 14

plate. The guarantee does not cover base-plate wear and
tear. Use coarse grit paper to sand rough surfaces, medium
grit for smooth surfaces and fine grit for the final surfaces.
If necessary, first make a test run on scrap material. Use
only good quality sandpaper. The sandpaper controls the
sanding efficiency, not the amount of force you apply to the
tool. Excessive force will reduce the sanding fficiency and
cause motor overload. Replacing the sandpaper regularly
will maintain optimum sanding efficiency.
MAINTAINENCE
Remove the plug from the socket before
carrying out any adjustment, servicing or
maintenance.
Keep tools sharp and clean for better and safer
performance. Follow instructions for lubricating and
changing accessories. Inspect tool cords periodically and if
damaged, have repaired by authorized service facility.
Your power tool requires no additional lubrication or
maintenance. There are no user serviceable parts in your
power tool. Never use water or chemical cleaners to clean
your power tool. Wipe clean with a dry cloth. Always store
your power tool in a dry place. Keep the motor ventilation
slots clean. Keep all working controls free of dust.
If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
EN
14