Publicidad
4. Aplications
This list is almost endless. Provided the product is non porous and can normally be immersed in water
almost anything can be thoroughly cleaned. Here are some examples:
•
Jewellery especially gold, silver & platinum
•
Watchstraps
•
Coins and other collectibles
•
PCB Boards etc
•
Engine/Model parts
•
Toothbrushes & Dentures
•
Electrical components
•
Diesel injection pumps
•
Printer heads and toner cartridges
•
Motorcycle radiators
•
Vehicle differentials
•
Milking parlour equipment
•
Horse bits&stirrups &horse brasses
•
Tattoo needles
•
Sugical equipment
•
Motorcycle engine crank cases
•
Engine cylinder heads
•
Turbochargers
•
Bicycle derailleurs
•
Ultrasonic cleaning is not recommended for the following gemstones: Opal, Pearl, Emerald,
Tanzanite, Malachite, Turquoise, Lapis and Coral.
5. Digital ultrasonic cleaner operation, cleaner structure and accessories
User's manual from ZCC016 to ZCC022
ENGLISH
Page. 14
Version 1, October 2022
1.
Fill stainless steel tank with liquid
Plug the ultrasonics into grounded outlet; After powing on, The temperature displays the actual
environment temperature, LED displays 3 minutes, which is default time.
2.
Turn on the power switch
Plug the ultrasonics into a grounded outlet. Turn on the power switch on the back of the tank. ("O"
is closed, and "I" is open)
3.
Start ultrasonic cleaning
For the first boot, time display show setting time at random, press time key+ one time, ''the setting
time'' on the display will be increase by 1 minute correspondingly, touch time key- to decrease time
setting by 1 minute. Touch ON/OFF switch after you have properly set the time, ultrasonic indicator
will turn red and the machine will start working based on the parameters set. Meanwhile the timer
will begin to count down and stop working when the time shows "00:00", automatically.
4.
Time setting:
Press the "TIME-/TIME+ "shortly at a time means time increase/reduce 1min at a time, press and
hold means time will increase/reduce by 1mins continuously. The cleaning stops when the timer
counts down to 00:00. If the unit needs to be stopped before the timer runs up, press ON/OFF button.
NOTE: Do not run the cleaner continuously for more than one hour
5.
Set temperature:
Press "temperature-/temperature+"shortly at a time
means time increase/reduce 1ºC at a time, press and hold there means time will
increase/reduce by 1ºC. Usually, the best results are within 40ºC ~ to 60ºC.
6. After time and heat setting, press ON/OFF key to start both function. Press
"Heating" button "OFF", the heating function will stop. The same for Ultrasonic
function.
7. Empty the tank and clean both the outside and inside of the cleaner with clean and dry cloth for
next use.
NOTE: Do not pour water out until it's cooling, Hot water will hurt you and damage the
machine itself.
User's manual from ZCC016 to ZCC022
ENGLISH
Page. 15
Version 1, October 2022
Publicidad
