Publicidad
Idiomas disponibles
Idiomas disponibles
Item
Description
1
Illuminated area
2
Impact protection
3
Mobile wireless antenna
4
Vent
5
Thread for eyebolt
Dust measurement and data transmission
The product has two dust sensors. The primary sensor is permanently
active and transmits the measured values to the control approximately
once per second.
The measured values are transmitted to the cloud via a mobile phone
network at a time interval that can be set by the user (10–10000 seconds,
factory setting 600 seconds).
Colour interpretation of the illuminated surface
The illuminated area (item 1) of the product shows the current dust
accumulation up to the set limit value (PM10) in the following colour scale
(here, for example, the factory setting of 0–10 mg/m³).
Dust accumulation
0 mg/m³
5 mg/m³
10 mg/m³
Tab. 13: Colour interpretation of the illuminated surface
Exceeding the threshold
If the set PM10 threshold is exceeded, the illuminated area lights up
continuously red and the relay on the control board switches. The
potential-free contact of the relay can be interrogated externally via the
three-pole M8 connection socket of the connection panels, for example to
control a general ventilation system.
3.2 Distinguishing feature – cloud connection
Settings and queries:
1502724-02
Item
6
7
8
9
10
11
Tab. 12: Positions on the product
Illuminated area
green
yellow
red
- 46 -
Description
Snap-in lock
Cover
Name plate
Connection panel
Housing
Tripod thread
EN
Publicidad
