Kemper AirWatch Instrucciones De Servicio página 62

Item Description
1 Sensor board
2 Plug connector
3. Carefully remove the defective sensor board by pulling it evenly and
dispose of it in accordance with the applicable regulations.
4. Unpack the new sensor board and insert it carefully. Make sure that the
sensor board is guided by the guide plates (item 3) and snaps into the
connectors (items 2 + 4).
5. Close the product again with the cover.
6. Put the product back into operation.
For details, see chapter "Commissioning".
1502724-02
Fig. 25: Changing the sensor board
Item
3
4
Tab. 19: Changing the sensor board
- 62 -
Description
Guide plate
Plug connector
EN