Timer Operations - Aiwa XR-MG9 Manual De Instrucciones

Adjustments
To switch to monaural FM reception
Hold down SHIFT and press TUNER MONO on the remote
control so that "MONO" is displayed.
To cancel, press again to display "STEREO."
Tip:
When FM stereo reception is poor, switching to monaural
reduces noise.
To switch the AM tuning interval
The default setting of the AM tuning interval is 10 kHz/step. If
you use this unit in an area where the frequency allocation
system is 9 kHz/step, change the tuning interval.
Hold down c and press POWER.
Tip:
When the AM tuning interval is changed, all preset stations
are cleared.

TIMER OPERATIONS

POWER
6STANDBY/ON
a/SET
f,g
FUNCTION
Sleep timer
Turns off the unit automatically after a specified time.
1 Hold down SHIFT and press SLEEP on the remote
control.
"SLEEP" is displayed.
2 Press f or g repeatedly to set the sleep
timer duration.
With each press, the timer duration changes in 5-minute
steps between 5 to 240 minutes. If there is no button input
for 4 seconds, the current setting is entered automatically.
The unit turns off after the selected time.
To check the remaining time until the unit turns off
Hold down SHIFT and press SLEEP on the remote control.
The remaining time is displayed for 4 seconds.
To cancel the sleep timer
Hold down SHIFT and press SLEEP repeatedly on the remote
control until "SLEEPoFF" is displayed.
SLEEP
TIMER
SHIFT
f,g
POWER
aSET
Timer playback
Turns on the unit at a specified time for the specified duration.
Make sure the clock is set correctly.
1 Press FUNCTION repeatedly to select the desired
playback source.
2 Hold down SHIFT and press TIMER.
"5" indicator lights up and "5 PLAY" appears on the
display. Then, the timer-on time and the source name
appear alternately on the display.
3 Within 7 seconds, press ENTER or a.
The timer-on time and the source name appear alternately
on the display.
4 Press f or g to set the timer-on time, then
press ENTER or a.
TUNER/BAND,
AUX, CD
En
ENTER
13