TOPRO Pegasus Instrucciones De Uso página 8

EN EN
NO
DE
3 Unfolding / Folding
NL
Unfolding: Release the lock clamp posi-
tioned at the seat bars (A). Press the seat
SV
bars down and outwards. The side frames
will slide apart. Press down the seat bars
DA
(B). You will hear a clicking sound. The
rollator is now locked in its open position.
Folding: Pull the strap on the seat (C)
FI
and press the side frames together.
Lock the clamp (D) over the seat bars.
Carrying the rollator: The rollator must
not be carried by the seat strap or the
brake cables. Fold the rollator as shown
on the illustration (E). Carry the rollator
FR
by the seat bars (F) when folded.
4 Handles
Height adjusting: Untighten the lock
ES
wheel (A) (approx. 2 turns). Adjust the
handle tube (B) to a suitable height, then
pull it slightly up and down (C) until you
hear a clicking sound. Tighten the lock
wheel (A). Adjust both handles to the
same height by comparing the number
scale on each side. The lowest possible
position of the handlebars (where the
markings are not visible) is not a user
height (it is for transportation only). It is
recommended that the handles are set to
the same height as your wrists when your
arms are hanging alongside your body.
5 Brakes
Make sure the brakes are working
before each trip. Each brake lever (A)
works on each of the rear wheels.
Do not drive or push the rollator while
the parking brakes are activated.
Parking brakes: Push both brake
levers downwards (A) until they lock.
Both rear wheels are now locked.
Squeeze both brake levers upwards
to release the parking brakes.
Driving brakes: Pull both brake levers
upwards (B) to reduce speed. Do not use
continuously while the rollator is in motion.
Adjusting / checking: Loosen the nut
(C). Tighten the brake cable (D) with
the adjustment screw (E). Adjust the
brake block (F) so the distance to the
inner drum brake is approximately 1
mm, and then tighten the nut (C). Turn
the wheel around to check that the
brake block is not touching the wheel.
Maintaining: Clean the brake block
(F) and the brake cover (G) regularly.
Control/tighten the screws (H). The
wheels and brake parts can be replaced
if they are worn out or damaged.
Art. No. User Manual: 104267 – Revision F, 2022-06
6 Detachable rear wheels
Removal: Loosen the brake lever.
Push down the red button on the hub
(A) and slide the wheel off the axle (B)
while still pushing the button down.
Attachment: Loosen the brake lever.
Slide the wheel unto the axle (B). Push
the wheel as far as possible inwards on
the axle to make the wheel snap onto
the axle. You will hear a "click" when the
wheel secures in locked position. The
wheel is securely fastened when the
axle is completely visible in the middle
of the hub (C). Gently pull the wheel
to check that it is securely fastened to
the axle. After the new wheel has been
applied to the rollator, ensure that the
brakes are functioning properly. Readjust
them if necessary (see section Brakes).
7 Seat
The rollator has a safe and convenient
mesh seat, which provides view to the
ground while walking. It can easily
be wiped off with a cloth if needed.
The parking brakes must be activated
before using the seat. Push both brake
levers downwards (A) until they lock.
Both rear wheels are now locked. Sit
with your back towards the bag (B).
8 Edge guard / Tilt function
Edge guard: The edge guards (A),
which are in front of the rear wheels
prevent the rear wheels from catch-
ing on corners, door frames etc.
Tilt function: To use the tilt function
use the front of the foot and press down
on the tilt pedal (B), which is beside the
rear wheel. This helps to tilt the rollator
over thresholds, edges etc. Please note:
Take care when descending kerbs.
9 Shopping bag
The bag is designed for carrying items
weighing up to a total of 10 kg.
Mounting: Activate the parking brakes
(A). Place the hooks in the hole positions
on top on each side of the frame (B).
Slightly turn the hooks outwards and
push them gently down (C). You will
hear a "click" sound when the hooks are
positioned correctly. Please note that
on the back side of the shopping bag,
there are two Velcro straps. For a better
weight distribution, we advise to use
the Velcro straps by attaching them
around the lower part of the cross bar.
– 4 –
TOPRO Pegasus
Removal: Activate the parking brakes
(A). If attached, start with loosening
the Velcro straps at the lower part
of the cross bar. Next, grip the lower
part of the hooks, turn them slightly
outwards and push them upwards
to detach them from the holes (D).
TOPRO ErgoGrip
TOPRO ErgoGrip offers ergonomic grip
and support surfaces. The top front of
the handles provides steady grip position
when getting up from a chair or couch.
Always make sure the parking brakes are
activated when getting up from seated
position. The ErgoGrip also offers extra
support while standing. Always use the
traditional grip position for easy access
to the driving brakes while walking.
Transport
The rollator should be transported
in the folded and locked position
(see section Unfolding / Folding). Ensure
that the lock clamp is on, so that the
rollator cannot unfold unintentionally. Be
careful when loading the rollator into a
vehicle, giving attention to securing it.
Storage
The rollator should be stored in an upright
position. If stored outdoors it must be
under a cover to protect it. Do not leave
the rollator unattended. Do not put heavy
items on top of the rollator during storage.
Cleaning
The rollator can be cleaned using a damp
nonabrasive cloth. In case of mud and
grime accumulation, a cloth with a mild
washing detergent can be used followed
by rinsing with lukewarm water. Do not
use high pressure cleaners and avoid
flushing directly against ball bearings
(in wheels and front forks). Do not use
abrasives or steam wash. The bag must be
detached before cleaning the rollator. The
bag can be removed and washed gently
at max. 40 °C. Do not spin-dry, to avoid
damage to the side panels. Remember
to close the bag before washing. Dry the
rollator using a soft nonabrasive cloth.