Kränzle K 1152 TS T Instrucciones De Servicio página 45

Be careful when using hot water!
When running your high pressure cleaner with hot water
of 60° C raised temperatures occur. Do not touch the
metal parts of the cleaner without safety gloves!
Ersatzteile auf www.gluesing.net
10.
Connect to circuit.
Kränzle 1152 TS T:
230 V ~, 12.0 A, 50 Hz
The socket must be protected with a 16 A
delay action fuse on the mains side.
11.
Put HP cleaner into horizontal position.
The machine must be operated in
horizontal position!
12
. Check water inlet filter for clean-
liness prior to putting the machine into
operation!
Manually unscrew hose attachment. Take out
the serial water inlet filter using needle nose
pliers and clean if filter is soiled.
13.
Prior to putting HP cleaner into
operation always check oil level at
oil-level glass.
(Make sure that cleaner is in horizontal
position!) The oil level must reach the top
edge of the "OK" marking.
GB
45