Inspections - Inspection Reports - Kränzle K 1152 TS T Instrucciones De Servicio

Inspection report for HP cleaners
HP cleaners for industrial use have to be checked by an expert every 12 months!
Inspection report on annually carried out Labour Safety Inspection (UVV) according to
the Guidelines for Liquid Spray Equipment. (This inspection sheet serves as proof for the
completion of the retest and must be kept carefully!)
Owner:
Address:
Scope of inspection
Type plate (on hand)
Operating manual (on hand)
Protective covering, -device
Pressure line (tightness)
Pressure gauge (function)
Float valve (tightness)
Spraying device (marking)
HP-hose / connector (damage, marking)
Safety valve opens at 10 % / 20 % exceeding of operang pr.
Power cable (damage)
Protective conductor (connected)
On / Off switch
Used chemicals
Allowed chemicals
Inspection data
High-pressure nozzle
Operating pressure..................bar
Switch off pressure................bar
Conductor resist. not exceeded / value
Insulation
Leakage current
Trigger gun locked
Inspection result (tick)
The appliance was checked by an expert according to the Guidelines for Liquid Spray
Equipment, the defects found have been rectified so that the Labour Safety can be confirmed.
The appliance was checked by an expert according to the Guidelines for Liquid Spray
Equipment. The Labour Safety cannot be confirmed unless the defects found are rectified by
repair or replacement of the faulty parts.
The next retest according to the Guidelines for Liquid Spray Equipment has to be carried out
by: Month
Place, date
58
Ersatzteile auf www.gluesing.net
Type:
Serial no.:
Rep. order no.:
o.k. yes
determined value
Year
Signature
Kränzle test seals: Order no. UVV200106
no repaired
set value