Battery Replacement; Cleaning And Maintenance - Sonel DIT-130 Manual De Uso

Note: This can only be done when the Trigger is pulled. LOG loca-
tion "0" cannot be accessed, by using the UP button.
(2) When LOG location "0" shows in the display, press the La-
ser/Backlight button. A tones will sound, and the LOG location will
automatically change to "1", signifying that all data locations have
been cleared.
8 Battery
ment
① As battery power is not sufficient,
LCD will display "
with one new 9V battery is re-
quired.
When making measurements with a battery's mnemonic on,
one must take into account additional indefinite measure-
ment uncertainty or unstable working of the meter.
② Open battery cover, then take out the battery from instrument
and replace with a new 9-Volt battery and place the battery
cover back.
9

Cleaning and maintenance

 Repairs or service are not covered in this manual and should
only be carried out by qualified trained technician.
 Periodically, wipe the body with a dry cloth. Do not use
abrasives or solvents on this instrument.
 For service, use only manufacturer's specified parts.
38
Replace-
" replacement
Attention:
DIT-130 – USER MANUAL