schmelzer ZZeparator Instrucciones De Uso Y Montaje página 33

1.1.1.1
- If necessary, attach required traffic safety.
- Secure against slipping.
- Accident prevention regulations.
Against falling things personal safety measures must be used.
5.4 Procedure for incidents and accidents
The work have to be set in the event of irregularities and disorders work.
In the case of an unforeseen failure, the machine has to be shut down, isolate it from electrical
network and then the interference is to eliminate or, if necessary, please contact your dealer.
6 Transport and assembly
The cleaner is packed separately in individual parts (Upper- and lower part). After the items
unpack can begin the installation. Note when assembling the safety instructions in 5.
The installation personnel should be familiar with the rules on the use of lifting devices, kicks
or conductors and the general accident prevention regulations.
1. Structure of the cleaner
The connection of the upper part (fan with pipe bend) and the lower part (cleaner body) using
the screws of M10 size. Note the tightening torque 50 Nm.
Figure 3: Upper part
Page 14 of 19