Publicidad
Idiomas disponibles
Idiomas disponibles
1.1.1.1
Figure 4: Lower part
After securing the circular flange, is still the engine support to be fastened with two screws.
Figure 5: Engine support
2. Following a dust collector (optional)
For the correct functioning, it is necessary that the cleaner will now be joined to a dust sepa-
rator. This dust separators are available to suit every cleaner. Note that in this case that an air
control device in the form of a valve or a frequency converter is required (also available).
Standard version:
The fan has a connector ( 4.2 ) and the plug to the power supply are connected.
Page 15 of 19
Publicidad
