Schwaiger QLS10S Manual De Instrucciones página 2

OPERATING INSTRUCTIONS AND SAFETY INSTRUCTIONS
GENERAL
Read the user guide and keep it in a safe place.
Congratulations and thank you for purchasing this Schwaiger Product.
This user manual is an integral part of this product. It contains important
information on commissioning and handling.
This user manual is intended to assist you in using the product. Read
through the instructions for use carefully. Store this guide safely through-
out the product's entire service life and pass it on to any subsequent
users or owners. Check that the supplied package is complete and ensure
that none of the parts are defective or damaged.
INTENDED USE
This product is designed exclusively for charging mobile devices that use
Qi technology. Other devices cannot be charged with the product.
The product is intended for private use only and is not suitable for com-
mercial use.
Only use the product as described in this user manual. Any other use is
considered improper and may result in property damage.
PACKAGE CONTENTS
Device overview
A) Front view
GENERAL SAFETY AND WARNING INSTRUCTIONS
WARNING!
Risk of electric shock!
Faulty electrical installation or excessive mains voltage can lead to elec-
tric shock.
• Do not operate the product if it has visible damage or the USB charging
cable is defective.
• Always check the product for damage before use. Damaged electrical
equipment as well as kinked power cords or bare wires increase the
risk of electric shock.
• Do not disassemble the product into its individual parts. Improper han-
dling can lead to electric shock and malfunction.
• Never immerse the product in water.
• Never touch the USB plug with wet hands
• Never pull the mains plug out of a socket by the connecting cable, but
always hold the mains plug.
• Never use the USB charging cable as a carrying handle.
• Keep the product and the USB charging cable away from open flames
and hot surfaces.
• Route the USB charging cable so that it does not become a tripping
hazard.
• Do not bend the USB charging cable or place it over sharp edges.
• Never operate the product in wet areas or in the rain.
• Do not expose the product to rain or extreme weather conditions e.g.,
sub-zero temperatures, hail, extreme heat.
• Never place the product in such a way that it can fall into water.
• Never reach for an electrical device if it has fallen into water. In such
a case, immediately pull the USB charger out of the charging socket.
• Make sure that no liquid gets into the product and, if necessary, dry the
product thoroughly before using it again.
• Ensure that children do not insert any objects into the product.
• Keep the product at least 20 cm away from pacemakers and other
medical devices. Radio waves can affect the function of pacemakers
and other medical devices.
• When you are not using the product, cleaning it or if a malfunction
occurs, always switch off the product and disconnect the power plug.
WARNING!
Hazards for children and persons with reduced physical, sensory
or mental abilities (for example, partially disabled persons, elder-
ly persons with reduced physical and mental abilities) or lack of
experience and knowledge (for example, older children).
• This product can be used by children aged from eight years and above
and persons with reduced physical, sensory, or mental capabilities or
lack of experience and knowledge if they have been given supervision
or instruction concerning use of the product in a safe way and under-
stand the hazards involved. Children must not play with the product.
Cleaning and user maintenance must not be carried out by children
without supervision.
• Keep children younger than eight years away from the product and the
connecting cable.
• Do not leave the product unattended during operation.
• Do not allow children to play with the packaging film. Children can get
caught in it while playing and suffocate.
WARNING!
Fire hazard!
Improper handling of the product may cause a fire.
• Keep the product away from water, other liquids, open flames, and hot
surfaces.
• Do not cover the product and the USB charging cable with objects or
clothing.
• Do not place open fire sources, such as lighted candles, on or near the
product.
• Keep a distance of at least 5 cm from easily flammable materials.
QLS10S
Schwaiger GmbH | Würzburger Straße 17 | 90579 Langenzenn | Direct line: +49 (0) 9101 702-299 | www.schwaiger.de | info@schwaiger.de
QLS10W
Office Hours: Monday to Friday: 8:00 a.m. - 5:00 p.m.
QLS10S_QLS10W_BDA_a
WARNING!
Explosion hazard!
Do not operate the device in an explosive environment containing flam-
mable liquids or gases. Never exceed the specified maximum input volt-
age.
• Avoid strong vibrations.
• Do not expose the device to extreme temperature fluctuations. Do not
put it into use until it has adjusted to the ambient temperature.
• Do not operate the device in the vicinity of strong magnetic fields, such
as motors, transformers or similar.
• The product is only de-energized when the mains plug is pulled out.
IMPORTANT!
Risk of damage!
Improper handling of the product may result in damage to the product.
• Place and operate the product on an easily accessible, level, dry,
heat-resistant, vibration-free, and sufficiently stable base to prevent
the product from falling. Do not place the product at the edge or on the
edge of the base.
• Keep at least 1 m away from high-frequency and magnetic interference
sources (TV set, other speaker boxes, etc.) to avoid malfunctions.
B) Rear view
• Never use the product in aircraft, hospitals, operating rooms or near
medical electronic systems. The transmitted wireless signals could af-
fect the radio functionality of sensitive electrical equipment.
• Never place the product on or near hot surfaces (e.g., stove tops).
• Do not bring the product and the USB charging cable into contact with
hot parts.
• The power outlet must be located near the product and must be easily
accessible.
• Unplug the product during lightning storms or when unused for long
periods of time.
• Never expose the product to high temperature (heating, etc.) or
weather (rain, etc.).
• Never pour liquid into the product.
• Never immerse the product in water for cleaning and do not use a
steam cleaner for cleaning. The product may otherwise be damaged.
• Do not use the product if the plastic components of the product are
cracked or deformed. Replace damaged components only with suitable
original spare parts.
• Do not place credit cards or other items with magnetic strips on the
unit, as this could corrupt or delete the data on the strip.
• Check that the back of the device does not contain any metal parts,
as these could become overheated during charging and damage the
product or device.
OPERATION IN DETAIL
Checking product and supplied package
Risk of damage!
If you open the packaging carelessly with a sharp knife or other pointed
objects, the product can be damaged quickly.
Be very careful when opening it.
1. Remove the product from the packaging.
2. Check if the delivery is complete.
3. Check whether the product or the individual parts show any damage.
If this is the case, do not use the product. Contact the hotline or
e-mail address specified in this instruction manual.
COMMISSIONING
Before using the charger, ensure that your device is QI compliant or
supports induction charging. If necessary, check the specifications or
user instructions for your device.
NOTE!
Risk of damage!
Operating the product with an unsuitable USB power supply may cause
damage to the product.
Only use USB power supplies that comply with the technical specifications
of this product for power supply
1. Place the product on a dry, horizontal surface that is not sensitive to
heat.
2. Plug the USB Type C plug of the USB cable into the USB Type C socket
of the product.
3. Plug the USB plug of the USB cable into a suitable USB power supply
(not included).
4. Plug the USB power supply into an easily accessible power outlet. The
status LED on the front of the product will light up blue briefly.
5. Now place the back of your mobile device on the charging surface of
the product. Make sure that the centre of your device is facing the
centre of the charging surface. Charging starts immediately on con-
tact. The status LED lights up green during this time.
The status LED flashes alternately green/blue as soon as a metallic
foreign object is detected on the charging surface or if the mobile
device is not placed correctly on the charging surface. In this case,
remove the foreign objects or place the mobile device correctly.
Protective covers used to protect the mobile device may interfere
with the charging process. In this case, the protective cover must
be removed from the mobile device. Take special care that no metal
elements or RFID blockers are built into the cover.
The maximum charging power depends on the power supply unit
used.
All technical data and illustrations are subject to errors, deviations & modifications.
TECHNICAL DATA
Item number QLS10S 513
QLS10W 512
Connections 1x USB Type C socket
Power supply 5.0 V 2.0 A or 9.0 V
Output power 5.0 W (Standard)
7.5 W (Apple
10.0 W max. (Android)
Place of use indoors
Frequency range 110 – 205 kHz
Maximum transmission 0,127 (A/m)
power
Protective systems overvoltage protection, overload
protection, short-circuit protection,
foreign body detection,
no-load protection
Dimensions (W x H x D) 70 x 118 x 88 mm
Colour black (QLS10S 513)
white (QLS10W 512)
Weight 142 g
MAINTENANCE & CLEANING
WARNING!
Risk of electric shock!
Always unplug the USB cable before cleaning the product.
IMPORTANT!
Short circuit hazard!
Water or other liquids entering the housing can cause a short circuit.
• Never immerse the product in water or other liquids.
• Make sure that no water or other liquids get into the housing.
IMPORTANT!
Risk of damage!
Improper handling of the product may result in damage to the product.
Do not use aggressive cleaning agents, brushes with metal or nylon bris-
tles, or sharp or metallic cleaning objects such as knives, hard spatulas,
and the like. These can damage the surfaces.
1. Before cleaning, switch off the product and remove the USB cable.
2. Clean the product with a soft, dry cloth.
3. If the product is stubbornly dirty, use a slightly damp cloth and a little
mild detergent if necessary.
4. Allow all parts to dry completely afterwards.
Storage
All parts must be completely dry before storage
• Always store the product in a dry place.
• Store the product out of reach of children, securely closed and at a
storage temperature between 5 °C and 20 °C (room temperature).
Simplified declaration of conformity as per the RED Directive
Schwaiger GmbH hereby declares that the described radio system prod-
uct complies with Directive 2014/53/EU and other directives applicable to
the product. The complete EU declaration of conformity is available online
at: http://download.schwaiger.de
Disposal
Do not dispose of batteries or electric and electronic devices in
the normalhousehold waste. The consumer is legally obliged to
return electrical and electronic devices, and batteries that are at
the end of their useful life to the point of sale or public collection
points that have been set up for this purpose. Legislation in the coun-
try of use stipulate the specific requirements regarding disposal. The
symbol on the product, user guide or the packaging in-dicates this
legal requirement.
Disclaimer
Schwaiger GmbH does not accept any liability or warranty for damages
that are sustained due to improper installation or mounting, improper use
of the product or non-compliance with the safety instructions.
Manufacturer's information
Dear Customer, please contact our Technical Support if you need technical
advice and your retailer is unable to help you.
Warranty
The warranty period starts when the product is purchased. The purchase
receipt, such as a till receipt, invoice or delivery slip, serves as proof of
this date. Keep these documents in a safe place. Our warranty is based
on our warranty conditions valid at the time of purchase.
Office Hours
(Technical Support in German)
Monday to Friday: 8:00 a.m. - 5:00 p.m.
1.8 A
iPhone)
®