Publicidad
Idiomas disponibles
Idiomas disponibles
STORAGE
When vacuuming is complete, your RIDGID Wet/Dry Vac
has convenient storage locations.
ACCESSORY STORAGE (Fig. 10)
1. For Storage: Slide the Extension Wands (K) and the
Accessory (M) onto the Caster Feet Posts.
2. To Remove Wands and Accessories: Lightly rotate
and pull upward.
3. For extra storage of Accessories use the Accessory
Caddy (P). The Blower Wand (L) fits in the center
opening while other Accessories (N & O) can be
snapped into the Two Side Clips.
LOCKING ACCESSORIES (Fig. 10)
Your RIDGID Wet/Dry Vac includes Locking Accessories
to prevent the Accessories from falling off when in use.
1. To Connect the Locking Accessories: Align the Nozzle
Ridges of the Accessory with the Locking Tab of your
Extension Wand (K). Press to secure the Nozzle to the
Extension Wand.
2 To Disconnect the Locking Accessories: Twist the
Nozzle and Extension Wand (K) to disengage the
Nozzle Ridges and pull. You may also press the
Locking Tab and pull to disengage.
(L)
(O)
Side
Clip (2)
Center
Opening
(K)
(M)
Caster
Foot Post
Locking
Tab
Nozzle
Ridges
9
Fig. 10
(P)
(N)
Publicidad
