kooa GEAR 3S Manual De Instrucciones página 24

Use
Switching the device on and off/Selecting trimming
speed
Using the comb attachment
The trimmer comes with comb attachments with the following trimming lengths: 3 mm,
6 mm, 9 mm, and 12 mm. The trimming length is indicated on the inside of the comb.
The trimmer can be used with or without the comb attachment.
Adjusting the trimming height
The trimming height can be adjusted in four steps: 1 mm, 1.3 mm, 1.6 mm, and 1.9 mm.
24
− Press
− Use
Display indications:
‚ Battery charge display in %
‚ Trimming speed display in bars (I, II or III)
Putting on the comb attachment
1. Switch off the trimmer if necessary.
2. Push the comb attachment onto the
trimmer blade as shown. Ensure it clicks
into place.
Removing the comb attachment
1. Switch off the trimmer if necessary.
2. Push the comb attachment off in the
direction of the arrow as shown.
This is how you can adjust the trimming length:
1. Press and hold the release button.
2. Push the slide switch to the desired length. The
trimming length indicator can be found above the slide
switch.
to switch the device on or o .
and to set the trimming speed.