Publicidad
Idiomas disponibles
Idiomas disponibles
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
76
JUST POWER ON
DC Input Voltage Low
DC Input Voltage High
DC Input Overcurrent
LLC Output Overvoltage
Inverter Overload
Inverter Output Failure
Over Temperature Protection
Hardware PV1 Failure
DSP Communication
Interrupted
BMS Communication
Interrupted
IOT Communication
Interrupted
Zero Drift Anomaly-ARM
RTC Read and Write Anomaly
Inverter Leakage
Current High
Check if the DC voltage is too low.
Check if the DC voltage is inconsistent with
the battery specifications.
Turn off the inverter and wait 30 minutes
to restart up it. If the symptom persists,
please contact the BLUETTI support team.
Check if the inverter is overloaded.
Turn off the inverter and wait 30 minutes
to restart up it. If the symptom persists,
please contact the BLUETTI support team.
Turn off the inverter and wait 30 minutes
to restart up it. If the symptom persists,
please contact the BLUETTI support team.
Turn off the inverter and wait 30 minutes
to restart up it. If the symptom persists,
please contact the BLUETTI support team.
Turn off the inverter and wait 30 minutes
to restart up it. If the symptom persists,
please contact the BLUETTI support team.
Publicidad
