Publicidad
Idiomas disponibles
Idiomas disponibles
Thank you very much for purchasing TOSHIBA Air Conditioner.
Please read this Operations manual carefully before using your Air Conditioner.
• Be sure to obtain the "Operations manual" and "Installation manual" from installer or
dealer.
Request to installer or dealer.
• Please clearly explain the contents of the Operations manual and hand over it.
Observe the safety precautions described in the Installation Manual supplied with the ceiling panel and air conditioner
(indoor unit).
Configuring an Occupancy Sensor
Be sure to set operations for "Occupancy sensor operation" and "Operation during absence" as described
below.
• An "Occupancy sensor" can detect whether people are present or not present.
If people are not present, the air conditioner automatically operates in an energy saving mode.
Occupancy sensor setting
1.Occupancy sensor operation
2.Operation during absence
Return
Item
Occupancy sensor operation
Operation during absence
NOTE
If an occupancy sensor has not been connected, "
1-EN
Invalid /
Enable
Standby /
Stopped
Fix
You can decide whether to disable the occupancy sensor or select the time
required to determine that people are not present.
Factory default setting is 60 minutes for determining time. You can select
Disable, 30 minutes, 60 minutes, 90 minutes, 120 minutes, or 150 minutes.
You can select the operation of the air conditioner when people are not
present. Standby: Circulation mode (thermostat OFF)
Stopped: Stops the air conditioner
1
Push the [
the menu screen.
2
Push the [
select "Occupancy sensor setting" on
the menu screen, then push the
"
Set
Function
No function" is displayed.
– 1 –
MENU] button to display
] / [
] button to
Set" [
F2] button.
Publicidad
